HOME   LINKS   ATI
Aerospace | Automotive | Die & Mold | Power Generation | Precision Machining
 

You are in Milling / Cartridge Face Mills
Cartridge Face Mills

All Stellram cartridge face mills feature a patented design that maintains the accuracy of the cartridge location even after a crash. The unique clamping and adjusting screws work in opposition to each other to allow setting of each insert within 0.004mm (0.00015").

Three different variations are available with 45°, 60° and 90° lead angles and with a variety of inserts.

Ø = Cutting Diameter
DOC = Maximum Depth of Cut

8000 V 
Medium pitch cutter with unequal division of teeth for surfacing cast structures, parts with drilled holes or thin walled sections.

4" - 16" / 100mm - 400mm

8000 VA 90 16 90° Inch
8000 VT 60 22 60° Inch
8000 VOD 45 04 45° Inch
8000 VOD 45 06 45° Inch
8000 VS 45 12 45° Inch
8000 VSE 45 09 45° Inch
8000 VSE 45 12 45° Inch
8000 VR 00 16 Inch
8000 VA 90 16 90° Metric
8000 VT 60 22 60° Metric
8000 VOD 45 04 45° Metric
8000 VOD 45 06 45° Metric
8000 VS 45 12 45° Metric
8000 VSE 45 09 45° Metric
8000 VSE 45 12 45° Metric
8000 VR 00 16 Metric

Go to Star Guide

Go Back
8010 V
Best solution for high temperature alloys. Similar to the 8000V, but with regular distribution of teeth.

4" - 8" / 100mm - 200mm

8000 VA 90 16 90° Inch
8000 VOD 45 04 45° Inch
8000 VOD 45 06 45° Inch
8000 VSE 45 09 45° Inch
8000 VSE 45 12 45° Inch
8000 VR 00 16 Inch
8000 VA 90 16 90° Metric
8000 VOD 45 04 45° Metric
8000 VOD 45 06 45° Metric
8000 VSE 45 09 45° Metric
8000 VSE 45 12 45° Metric
8000 VR 00 16 Metric

Go to Star Guide

Go Back
8100 V
Coarse pitch cutters with differential pitched teeth for large steel components or light materials.

5" - 16" / 125mm - 400mm

8000 VA 90 16 90° Inch
8000 VOD 45 04 45° Inch
8000 VOD 45 06 45° Inch
8000 VSE 45 09 45° Inch
8000 VSE 45 12 45° Inch"
8000 VR 00 16 Inch
8000 VA 90 16 90° Metric
8000 VOD 45 04 45° Metric
8000 VOD 45 06 45° Metric
8000 VSE 45 09 45° Metric
8000 VSE 45 12 45° Metric
8000 VR 00 16 Metric

Go to Star Guide

Go Back
Finishing Cartridges 
Cartridge 81FS00R-12 is available for super finishes as close as 2µm. One, two or three cartridges can be used on one assembly.

81 FS 00 Inch
81 FS 00 Metric

Go to Star Guide

Go Back
Go Back
1st Choice product solutions. Improve your productivity by selecting the material for your application.
P Unalloyed Steel K Cast Irons
Alloyed Steel N Aluminum & Alloys
M Stainless Steel S High Temperature Alloys
PH Stainless H Hard Materials
Back to the Top
Milling Products  
End Mills/ Face Mills
Cartridge Face Mills
Disc Cutters
Long Edge Cutters
Contour Cutters
Plunge Milling
Profiling/ Pocketing
T-Slot
Thread Milling		  


Milling Links 		 
Electronic Catalog
 Milling Geometries
 Milling Grades
  
     
  Terms & Conditions | Privacy Policy | Copyright | Contact Us | Stellram Home  
  1 Teledyne Place, La Vergne, TN 37086, USA - 615.641.4200 FAX: 615.641.4441